Linux下链接文件使用RM无法删除的解决办法


在进行U-boot开发的时候,遇到一个小问题。网友wanglida79前几天刚遇到过,我当时没有模拟出来,现在自己倒是遇上了。不过我想出了解决的办法,只不过原因不明确,或许使用方法不对,或许有bug。

现象描述:

进行U-boot移植的开发,为了patch方便,将源码的名字命名为.orig,这样以示区分。但是名字太长,在命令行下操作不太方便,所以想法就是建立软链接。

[armlinux@lqm bootloader]$ tree -L 1
.
|-- patch
|-- u-boot-1.1.3
|-- u-boot-1.2.0
|-- u-boot-1.2.0.orig
|-- vivi
`-- vivi_origin
6 directories, 0 files
 

上面是目录下的主要文件夹。现在将源码链接为orig,将开发部分链接为develop。 [armlinux@lqm bootloader]$ ln -s u-boot-1.2.0.orig/ orig
[armlinux@lqm bootloader]$ ln -s u-boot-1.2.0 develop
[armlinux@lqm bootloader]$ ls
develop orig patch u-boot-1.1.3 u-boot-1.2.0 u-boot-1.2.0.orig vivi vivi_origin
 


如上。现在想要删除develop和orig。出现意外情况: [armlinux@lqm bootloader]$ rm develop/
rm: cannot remove `develop/': Not a directory
[armlinux@lqm bootloader]$ rm -f develop/
rm: cannot remove `develop/': Not a directory
[armlinux@lqm bootloader]$ unlink develop/
unlink: cannot unlink `develop/
 


看来删不掉。删除orig也同样如此。转念又实验了利用find来删除: [armlinux@lqm bootloader]$ find . -type l | xargs rm -f
[armlinux@lqm bootloader]$ ls
patch u-boot-1.1.3 u-boot-1.2.0 u-boot-1.2.0.orig vivi vivi_origin
 

看来能够成功。

现象分析与解决:

上面提供的find and xargs的删除方法可以实现。但是只用rm为什么不能删除呢。我想应该是使用的方法上有问题,必须查阅rm和ln的用法。经过man查阅,ln的使用和rm的使用并没有问题。推翻了前面的想法,我想从rm直接删除和find删除的不同入手找到原因。 [armlinux@lqm bootloader]$ find . -type l
./develop
./orig
 


看来原因找到了。我在使用rm的时候总是习惯使用TAB键补全命令,但是TAB补全命令的时候,最后是以“/”结尾的。很明显的原因,rm也好,unlink也好,并不能很好的处理这种情况,这算是一处bug。我在前面写shell脚本来实现autozip时的时候,自己遇到过这个问题,采用了awk解决。原有的脚本如下:

[armlinux@lqm bin]$ cat autozip
#!/bin/bash
# Copyright 2007 (c), Shandong University
# All rights reserved.
#
# Filename : autozip
# Description: Compress files, and print "OK" out if the file
# can be compressed successfully.
# Syntax : autozip [filename | directory name]
# Author : Liu Qingmin
# Version : 1.0
# Date : 07-04-29
#
# Func: get_target()
# Desc: Obtain the name of target file
# Para: {GetProperty(Content)} -- file name that will be compressed
# Ret : TARGET -- current file name
get_target()
{
TARGET=`echo {GetProperty(Content)} | \
awk -F/ '{if ($NF == "") print $(NF-1); \
else print $(NF)}'`
}
# Handle Parameters
if [ $# != 1 ];then
echo "Usage: `basename {GetProperty(Content)}` <FILENAME directoryname |>"
exit 1
fi
# Assign the parameter to the Macro OPT
OPT={GetProperty(Content)}
# Uncompress files
if [ -d $OPT ]; then
get_target $OPT
tar zcvf ${TARGET}.tar.gz $OPT && echo "OK"
elif [ -f $OPT ]; then
get_target $OPT
cp $OPT tmp
gzip tmp
cp tmp.gz ${TARGET}.gz
rm tmp.gz
if [ -x ${TARGET}.gz ]; then
chmod -x ${TARGET}.gz
fi
echo "OK"
fi
 


上面的get_target就是对这个情况的处理。不过没有想到rm也无法处理这种情况,要知道,使用TAB键提高效率是经常用的手段啊。

找到了bug,还没有看rm的源代码,倒是可以利用上面的脚本的思路来解决这个小bug。写了一个脚本rmlink,如下:

[armlinux@lqm bin]$ cat rmlink
#!/bin/sh
# Copyright 2007 (c), Shandong University
# All rights reserved.
#
# Filename : rmlink
# Description : solve the bug of "rm" and "unlink"
# Syntax : rmlink <linkfile name>
# Author : Liu Qingmin
# Version : 1.0
# Date : 07-09-19
#
# Func: get_target()
# Desc: Obtain the name of target file
# Para: {GetProperty(Content)} -- file name that will be compressed
# Ret : TARGET -- current file name
get_target()
{
TARGET=`echo {GetProperty(Content)} | \
awk -F/ '{if ($NF == "") print $(NF-1); \
else print $(NF)}'`
}
# Handle Parameters
if [ $# != 1 ];then
echo "Usage: `basename {GetProperty(Content)}` <LINKFILE name>"
exit 1
fi
# Assign the parameter to the Macro OPT
OPT={GetProperty(Content)}
# Uncompress files
if [ -d $OPT ]; then
# eliminate the "/" at the ending
get_target $OPT
# you also can use "unlink" instead of "rm"
rm ${TARGET}
fi
# OK
exit 0
 


测试:

[armlinux@lqm bootloader]$ ls
develop orig patch u-boot-1.1.3 u-boot-1.2.0 u-boot-1.2.0.orig vivi vivi_origin
[armlinux@lqm bootloader]$ rmlink develop
[armlinux@lqm bootloader]$ rmlink orig
[armlinux@lqm bootloader]$ ls
patch u-boot-1.1.3 u-boot-1.2.0 u-boot-1.2.0.orig vivi vivi_origin
 


可见测试正常,rmlink可以正常使用。

至此,问题最终解决。

附:
 
vmware崩溃,导致关心查阅磁盘空间和文件大小。现在附几个常用的小命令,备查阅。

·查看文件的大小

[armlinux@lqm bootloader]$ ls -hl
 


·如果只想看到大小,而不希望看到其他信息,可以使用下面的命令:
 
[armlinux@lqm bootloader]$ ls -hl | awk '{print $5 "\t" $NF}'
 

 
·查看单个目录占用空间的大小
 
[armlinux@lqm bootloader]$ du -hs u-boot-1.2.0
71M u-boot-1.2.0
 

 
·查看磁盘剩余空间的大小
 
[armlinux@lqm bootloader]$ df -hl
 

 
关于选项-h,在ls等等的命令中都有,具体的含义是一致的,如下:
 
-h, --human-readable
with -l, print sizes in human readable format (e.g., 1K 234M 2G)
 

 
从上面的显示,可以看出,如果不加-h,那么大小是以字节显示的,如果加入-h,那么就以很明显的K,或者M来显示,也就明确的多了。

本文作者:
« 
» 
快速导航

Copyright © 2016 phpStudy | 豫ICP备2021030365号-3