一.说明：
配置如下：Win2000 Server + IIS 5.0（Win2000自带）+ Tomcat 3.1 binary release.
我使用的Tomcat 3.1是编译过的版本，在这个版本里面没有配置IIS和NT Service
的说明，但是在Tocmcat 3.2 source版里面有比较详细的帮助文件。根据这些帮助文件 可以顺利的把Tomcat作为插件插入IIS。
二.启动tomcat
安装完tomcat之后（具体安装过程略），要启动Tomcat很简单，首先可以查看tomcatinstartup.bat文件，利用控制面板里面的系统－>高级->环境变量对话框，新建环境变量TOMCAT_HOME和JAVA_HOME，使它们各自指向TOMCAT和JDK的根目录即可。另外为保险起见，可以在path里面把二者的路径添加进去。然后开启一个DOS窗口执行startup.bat。 启动Tomcat后，会有一个DOS窗口显示启动情况。此时访问http://localhost:8080可以看到Tomcat的一些示例。
三.配置
下一步工作就是如何把Tomcat插入IIS,使二者协同工作。主要分以下几个步骤：
1、在Windows注册表中注册：
将下面的begin和end之间的Jakarta.reg文件装入机器，我的Tomcat装在c:\jakarta-tomcat，你可根据自己的环境修改Jakarta.reg文件
Jakarta.reg:
---begin---
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWAREApache Software FoundationJakarta Isapi Redirector1.0]
"extension_uri"="/jakarta/isapi_redirect.dll"
"log_file"="c:\jakarta-tomcat\logs\isapi.log"
"log_level"="debug"
"worker_file"="c:\jakarta-tomcat\conf\workers.properties"
"worker_mount_file"="c:\jakarta-tomcat\conf\uriworkermap.properties"
---end---
注：其中的路径需改成你的tomcat的安装路径。
2、打开IIS管理器，在"默认WEB站点”中建立一个虚拟目录jakarta，让它的路径指向isapi_redirect.dll所在目录。（在3.1 bin中可能没有这个dll，你可以从3.2的biniis t4i386目录中拷贝一个过来。该虚拟目录应被设置为"可执行”。
3、利用IIS管理器，把isapi_redirect.dll设置为"默认WEB站点”的ISAPI筛选器，名称可以任起。
4、重启IIS，确认刚才添加的ISAPI筛选器前面标了一个绿色向上的箭头然后重启Tomcat（执行tomcatinshutdown.bat可关闭Tomcat） 此时，IIS应该已经可以处理*.jsp文件了。由于Tomcat设置中，默认的Root是 tomcatwebappsROOT，所以你可以在这个目录中放置一个jsp文件（例如 index.jsp），然后访问http://localhost/index.jsp，看一下效果。 如果按照上面的方法还是无法使IIS处理jsp文件，可以尝试在IIS管理器－>默认WEB站点属性－>主目录－>配置中添加一个"应用程序映射”，把*.jsp文件映射到isapi_redirect.dll上。
四.作为NT的服务
作为NT service的设置比较简单。
首先从3.2拷贝过来jk_nt_service.exe，然后把下面的内容保存起来，起名
为wrapper.properties
#
# $Header: /home/cvs/jakarta-tomcat/src/etc/wrapper.properties,v 1.1
#2000/05/03 11:54:49 shachor Exp $
# $Revision: 1.1 $
# $Date: 2000/05/03 11:54:49 $
#
#
# jk_service.properties - a bootstrup file for the Tomcat NT service.
#
# This file provides jk_nt_service with the needed information to
# start tomcat at a different process.
#
# As a general note, the characters $( and ) are used internally to define
# macros. Do not use them!!!
#
# Whenever you see a set of lines such as:
# x=value
# y=$(x)something
#
# the final value for y will be valuesomething
#
# Normaly all you will need to modify is the first two properties, i.e.
# wrapper.tomcat_home and wrapper.java_home. Most of the configuration
# is derived from these two.
#
#
# wrapper.tomcat_home should point to the location where you
# installed tomcat. This is where you have your conf, webapps and lib
# directories.
#
wrapper.tomcat_home=d: omcat
#
# wrapper.java_home should point to your Java installation. Normally
# you should have a bin and lib directories beneath it.
#
wrapper.java_home=d:JBuilder35jdk1.2.2
#
#------ ADVANCED MODE ------------------------------------------------
# Make sure that you read the how-to before making too many changes.
#---------------------------------------------------------------------
#
#
# Defining where the service is going to put the standard
# output of Tomcat. This is where System.out.println and
# System.err.println goes to.
#
wrapper.stdout=$(wrapper.tomcat_home)jvm.stdout
wrapper.stderr=$(wrapper.tomcat_home)jvm.stderr
#
# Additions to the path. put here directories where you store DLLs for
# native methods etc.
#
wrapper.ld_path=d:
wrapper.ld_path=c:
#
# Defining the classpath. All the rows that belongs to the class_path
# property are concatenated to create the classpath for Tomcat.
#
# If you have additional locations that you would like to add to the
# claspath you should add a new wrapper.class_path=<location> line.
#
wrapper.class_path=$(wrapper.tomcat_home)classes
wrapper.class_path=$(wrapper.tomcat_home)libxml.jar
wrapper.class_path=$(wrapper.tomcat_home)libwebserver.jar
wrapper.class_path=$(wrapper.tomcat_home)libservlet.jar
wrapper.class_path=$(wrapper.tomcat_home)libjasper.jar
#
# This is where Javac is located in JDK1.2.x
#
wrapper.class_path=$(wrapper.java_home)lib ools.jar
#
# and a tribute to JDK1.1.x
#
wrapper.class_path=$(wrapper.java_home)libclasses.zip
#
# This is the Java interpreter used for running Tomcat
#
wrapper.javabin=$(wrapper.java_home)injava.exe
#
# This is Tomcat′s startup class (the class that contains Tomcat′s
# starting point.
#
wrapper.startup_class=org.apache.tomcat.startup.Tomcat
#
# This is the location where tomcat′s server.xml configuration file
# is located.
#
wrapper.server_xml=$(wrapper.tomcat_home)confserver.xml
#
# The NT service uses AJP12 to shutdown Tomcat. The wrapper.shutdown_port
# tells the service the identity of the port that is used by AJP12.
#
wrapper.shutdown_port=8007
#
# This is the command line that is used to start Tomcat. You can *add* extra
# parameters to it but you can not remove anything.
#
wrapper.cmd_line=$(wrapper.javabin) -classpath $(wrapper.class_path) $(wrapp
er.startup_class) -config $(wrapper.server_xml) -home $(wrapper.tomcat_home)
保存后，只需修改里面的wrapper.tomcat_home和wrapper.java_home使它们各自指向tomcat根目录和JDK根目录即可。 然后运行jk_nt_service -I <服务名称> <wrapper.properties的路径> 服务名称可以随便起，例如tomcat或者jakarta等等都行。wrapper.properties的路径应为完整路径（包括wrapper.properties这个文件名）示例：jk_nt_service -I Jakarta d:wrapper.properties 这样在控制面板－>服务里面，我们可以看到一个名为Jakarta的服务，可以 在这里启动或者中止它
本文作者: