Linux系统邮件服务器的搭建过程解析


1. 用以下命令查看系统是否安装了sendmail:
 
  [root@mail /root]# rpm –qa |grep sendmail
 
  sendmail-8.11.0-8
 
  2. 卸载sendmail:
 
  [root@mail /root]# rpm -e sendmail –nodeps
 
  3. 用以下命令杀死运行中的sendmail进程:
 
  [root@mail /root]# killall sendmail
 
  如果系统提示:
 
  sendmail: no process killed
 
  则说明当前系统中没有sendmail进程。
 
  4. 安装postfix:
 
  [root@mail /root]# rpm -ivh postfix-20010228release-2.i386.rpm
 
  若已经安装,则此步可以省略。(注:安装时最好用rpm包,会自动创建postfix用户和postfix组)
 
  5. 安装imap
 
  rpm –ivh /mnt/cdrom/RedHat/RPMS/ imap-4.7c2-12.rpm
 
  imap使pop3有效,即打开110端口。(注:安装时最好用rpm包)
 
  若已经安装,则此步可以省略。
 
  6. 检查系统中是否安装了cyrus-sasl
 
  执行以下命令查看系统中是否安装了cyrus-sasl:
 
  rpm –qa |grep cyurs
 
  如果您看到以下提示,则说明已经安装了cyrus-sasl
 
  [root@test bye2000]# rpm -qa |grep sasl
 
  cyrus-sasl-devel-1.5.24-17
 
  cyrus-sasl-1.5.24-17
 
  否则,请用rpm –ivh 命令先安装所需sasl-cyrus包。
 
  7.修改postfix用户
 
  同时应该让该用户不能登录到系统,也即不为该用户指定可执行的登录外壳程序和可用
 
  的用户宿主目录。
 
  编辑/etc/passwd文件中的相关条目如下所示:
 
  postfix:x:89:89::/no/where:/no/shell [编辑后,只修改蓝色部分就可以了]
 
  即:修改用户的Home directory和Shell 参照 /etc/passwd文件
 
  8.编辑postfix的主要配置文件/etc/postfix/main.cf,根据需求只需修改以下几个参数:
 
  1)mydomain
 
  指明你的域名,在这里我们指定:
 
  mydomain = xx.com
 
  2)myorigin
 
  myorigin参数指明发件人所在的域名。如果你的用户的邮件地址为user@domain.com,则该参数指定@后面的域名。在这里我们指定:
 
  myorigin = $mydomain
 
  3)inet_interfaces
 
  inet_interfaces = all 监听所有端口
 
  4)mydestination
 
  mydestination参数指定postfix接收邮件时收件人的域名,换句话说,也就是你的postfix
 
  系统要接收什么样的邮件。通常与myorigin一样:
 
  mydestination = $mydomain
 
  5)mynetworks_style
 
  设置网络类型,我们指定:
 
  mynetworks_style = subnet
 
  6)ynetworks
 
  定义可以使用的此smtp服务器发信的客户ip地址,因为公司的ip范围已知,所以我们
 
  指定:
 
  mynetworks = 192.168.1.0/24
 
  注:此项可根据情况而定,主要是指定ip范围,假如公司的ip划分是按照网段来的,例如:10.10.1.0~10.10.1.9,10.10.3.0~10.10.3.9等等更细。根据需要,该项可以不设置。
 
  7)SMTP的配置
 
  为了告诉postfix采用sasl来进行SMTP的用户认证,我们必须在/etc/postfix/main.cf文件的最后添加以下几行:
 
  smtpd_sasl_auth_enable = yes
 
  smtpd_recipient_restrictions = permit_sasl_authenticated
 
  permit_auth_destination reject
 
  broken_sasl_auth_clients = yes
 
  smtpd_sasl_security_options = noanonymous
 
  说明如下:
 
  smtpd_sasl_auth_enable:告诉SMTP客户,该SMTP服务器需要进行用户认证。
 
  smtpd_recipient_restrictions = permit_sasl_authenticated
 
  permit_auth_destination reject
 
  仅仅中继通过SMTP认证的客户端邮件,以及接收本postfix为最后一站的邮件。
 
  broken_sasl_auth_clients = yes
 
  有一些Microsoft 的SMTP客户端,比如Outlook Express 4.X采用的是非标准的SMTP认证协议,将该选项设置为yes可以解决这类不兼容问题。
 
  smtpd_sasl_security_options = noanonymous
 
  控制本地SMTP认证所采用的机制,这里是允许任何非匿名认证方法。
 
  9.配置SASL
 
  进入/usr/lib/sasl/目录,用touch新建这样一个文件:
 
  [root@test sasl]# touch smtpd.conf
 
  在该文件中加入以下内容:
 
  [root@test sasl]# more smtpd.conf
 
  pwcheck_method:pam
 
  也就是指定通过PAM来进行用户认证。
 
  10.配置PAM
 
  进入/etc/pam.d/目录,用touch新建这样一个文件:
 
  [root@test pam.d]# touch smtp
 
  在该文件中加入如下内容:
 
  [root@test pam.d]# more smtp
 
  #%PAM-1.0
 
  auth required /lib/security/pam_stack.so service=system-auth
 
  account required /lib/security/pam_stack.so service=system-auth
 
  也即和/etc/pam.d/pop文件的内容是一致的。
 
  11.修改/etc/shadow文件权限
 
  因为PAM最终要去读取/etc/shadow文件的内容来进行用户认证,但是/etc/shadow文件
 
  权限是设置为只有root用户可以读写,而我们的postfix是运行在postfix用户权限之下,所以我们要合理的设置/etc/shadow文件权限,以便让pam可以读取其内容。
 
  执行以下命令,让root组也可以读取shadow:
 
  [root@test /etc]# chmod 640 /etc/shadow
 
  然后再将postfix用户加入root组,采用以下命令:
 
  [root@test /etc]# usermod -G root postfix
 
  12.编辑postfix的主要配置文件/etc/postfix/master.cf
 
    # ========================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ========================================
smtp inet n - n - - smtpd

 
  这里开始
 
    #smtps inet n - n - - smtpd
# -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission inet n - n - - smtpd
# -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
 
 
  这里结束
 
  #628 inet n - n - - qmqpd
 
  把我标的注释部分去掉即可。
 
  13.配置pop3
 
  RedHat7.0已经使用xinetd代替了以前的inetd,为了使pop3服务启动,我们编辑
 
  /etc/xinetd.d/ipop3文件,将其中的disable = yes改为disable = no 以便启动pop3
 
  服务。
 
  为了使改动生效,执行以下命令:
 
  /etc/rc.d/init.d/xinetd reload
 
  14.启动postfix
 
  执行以下命令启动postfix:
 
  /etc/rc.d/init.d/postfix start
 
  这样,一个支持SMTP认证的postfix邮件服务器就配好了

本文作者:
« 
» 
快速导航

Copyright © 2016 phpStudy | 豫ICP备2021030365号-3